실험실장비    >     Isostatic Press   >    Electric Split Lab Cold Isostatic Press


Electric Split Lab Cold Isostatic Press (CIP)

65T / 100T / 150T / 200T


Working Pressure
0-200T
Piston diameter
φ160-φ290 mm
Isostatic pressure
300 MPa

제품명    PCESI

제조사    Kintek Solution

원산지    China


 제품설명


  • Lab Electric Cold Isostatic Press는 재료 연구실, 제약, 촉매 반응, 도자기, 전자 산업 분야에서 널리 사용되고 있으며, 작은 설치 면적과 운반 및 이동의 용이성 덕분에 샘플 준비를 위한 고효율 장비입니다. 진공 환경에서 처리하기 위해 진공 글러브 박스 내부에서 작업할 수 있습니다.
  • Lab Electric Isostatic Press는 시료의 각 표면에 동일한 압력을 가함으로써 고압 환경을 적용하여 시료의 밀도를 높이고 원하는 모양의 시료를 얻습니다.
  • 분할 등압 프레스는 더 높은 압력을 제공할 수 있으므로 높은 압력 수준이 필요한 테스트 응용 분야에 적합합니다.


 Detail & Parts

  1. Set: In operation interface, press the SET button to enter the interfac, and then press the SET button to move the cursor; when thecursor is moved to Die Diameter , you can press the SET button again to return to the operation interface.
  2. +: In operation interface, press the + button to increase the value;
  3. -: In operation interface, press the - button todecrease the value;
  • Stop: When the equipment is running,press the STOP buttonto stop motor running and open the pressure relief valve to release the pressure.
  • Release: The equipment starts running when theRELEASE button is pressed down; when the pressure exceeds the specified value or the limit switch is pressed, the equipment stops automatically and releases pressure.The operation also can be stopped manually.
  • Sample:The equipment starts running when the SAMPLE button is pressed down; when the pressure exceeds the specified value, the pressurizing stops and maintains the pressure ; when the pressure is lower than the lower limit , the equipment compensates automatically; when the timing ends, the equipment releases pressure automatically.